Red Hat NETWORK SATELLITE 5.0.0 - Bedienungsanleitung PDF herunterladen (Seite 11)

2) Next, open up the host system's profile in the Satellite web interface. Log

into the web interface of your Satellite at https://your-satellite.example.com/.

Click on the 'Systems' tab in the top red navigational bar. You should see the

host system you just registered – click on its profile name to access its system

profile page.

3) Add a provisioning entitlement to your host system. From your host

system's profile page, click on Details > Properties tab. Check the

'Provisioning' check box in the 'Add-On Entitlements' field, and click the

'Update Properties' button in the lower right-hand corner of the screen.

4) Now, let's schedule the kickstart. You'll be brought back to the host system's

profile page. You should now see a 'Provisioning' tab in the system profile.

Click on this tab. This should bring up the 'Schedule Kickstart' page for the

system.

5) Select the kickstart profile we created for this host earlier. If you followed

'Step 1: Create a Kickstart Profile for the Host System' you should see a profile

with the name 'host-system-for-virtual-systems.' Select this profile. Then,

select the 'Schedule Kickstart and Finish' button in the lower right-hand corner

of the screen.

NOTE:

If you do not see the 'host-system-for-virtual-systems' kickstart profile on

the host system's 'Schedule Kickstart' page, you may have either:

1. Provided a different label for this kickstart profile during 'Step 1: Create a

Kickstart Profile for the Host System.' In this case, simply select the label

you did provide during that step on this screen.

2. Created a kickstart profile for an architecture that does not match the

architecture of the host system you have registered. If this is the case, pull

up the kickstart profile by navigating to Systems > Kickstart > Profiles

within the Satellite web interface, and clicking on the label for the host

system's kickstart profile. Click on the Kickstart Details > Operating

System tab, and select items under the 'Base Channel' and 'Available

Trees' selections that match the architecture of your host system. Click the

'Update Kickstart' button in the lower right-hand corner of the screen, and

navigate back to the host system's 'Schedule Kickstart' page, following the

steps above this note.

Red Hat Satellite 5.0: Step-By-Step 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 21 22

Keine Kommentare

Red Hat NETWORK SATELLITE 5.0.0 - Bedienungsanleitung Seite 11